|
The base jack is used to level the scaffold. The adjustment is achieved by rotating the collar on the threaded stem.
Standards are manufactured from 48.3 x 3.35 HT scaffold tube. Clusters of four "V" pressings at 90° to each other are situated at 500mm centres along the length of the standard. (External connector can be included.)
The horizontal member is a tubular ledger with captive wedge "C" pressings on each end which locate on the "V" pressings on the standard. The ledgers are normally placed at 2 metre centres but additional ledgers can be inserted to be used as guard rails.
The diagonal brace is a tubular brace with half-swivel couplers at either end to locate to uprights. Note: A swivel "C" pressing can also be supplied as an alternative to the half coupler.
The boards have non-tilt ends to hook onto the ledgers, where they interlock with each other, and a non-slip surface to form a safe working platform.
This provides a safe platform edge to prevent loose items falling from platform.
This bracket locates onto the standard to hold a toe board vertically in place.
The connector is inserted into the top of the standard to join vertical standards together. (External sleeve connectors welded to the standards are also available.)
|
