Uni-Span's gangform climbing system is crane handled and fixed to the concrete with anchor screws. The plumbing bracket has an adjustment screw which is used for verticle alignment. The hanging bracket provides a safe working platform for grouting and removal of lower anchors.

Soldiers have plan dimensions of 300mm deep x 150mm wide and are designed to carry maximum moments of 40kN/m with a safety factor of 2:1.

Access brackets provide for a three board working platform 685mm wide. The access bracket can be attached to the soldier at the required position.

Mass 19.78kg

The plumbing bracket has two attachment points 1 200mm apart to bolt the bracket vertically to the soldier. An adjustment screw which extends 900mm from the soldier is used for vertical alignment.

This climbing system is crane handled and is easily plumbed and aligned. A minimum amount of crane time is required to simply lift the shutter and hook it onto the climbing cone which was cast into the concrete on the previous pour. The scissor action allows the formwork to be rolled back to enable the panels to be cleaned and oiled in position without having to lower the shutter to the ground or the floor below.