Scaffolding | Slab System | Building Support

slab system, building support, building accessories, south africa

Scaffold Mass 3.7kg/m Base Plate Mass 1.2kg Channel Mass 11kg/m

Tube is high tensile
48.42mm x 3.35mm
Can be supplied in pre-
determined lengths either
straight or radiused.

The spigot fits into the
standard and is used
when the Uni-Stage is
erected on a level surface
bed.

100mm x 50mm channel:
Used mainly as straight
walers on wall shutters
and also as bearers on
soffit panels. Radiused
channel aslo availabe.

Base Jack Mass 4.3kg "J" Head Jack Mass 4.9kg "U" Head Jack Mass 5.1kg

38mm x 4mm tube.
Thread 610 R/O: The base
jack is used to accommodate
variations in ground levels.
Total adjustment is 610mm.

38mm x 4mm wall
thickness 610mm R/O.
The "J" headcan take 9 x 3
timber bearer or a 100mm
x 50mm steel channel.

38mm x 4mm wall
thickness 610mm R/O
Can take twin timber
or a double 100mm x
50mm steel channel

       Light Duty
       Connector Mass0.39kg       90° Coupler 50mm x
      50mm Mass 1.3kg       Swivel Coupler 50mm x
      50mm Mass 1.4kg

     30mm x 2mm wall
     thickness. Joins vertical
     standards together.

Clamps scaffold tube at
90° angle.

  The coupler has a swivel
  joint to allow the tube to be
  connected at the required angle.

         Band and Plate
         Mass 2.9kg               "J" Head Spigot
              Mass 1.45kg               "U" Head Spigot
              Mass 1.80kg

To connect two tubes at right angles.

150mm x 75mm x 6mm. Can take 9 x 3 timber bearer or a 100mm x 50mm steel channel

20mm x 150mm x 6mm. Can take twin timber or a double 100m x 50 mm steel channel.